阿斯卡美國**品牌*壓閥系列電磁閥
上海乾拓貿易有限公司
電話：
手機： (微信)
郵箱：@163.com
企業QQ：
聯系人：
地址：室
IEC 335 Electrical enclosure protection Moulded IP65 (EN 60529) Standard voltages
DC (=) : 24V - 48V (Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V -
power ratings operator ambient temperature range (TS)
hot/cold = ~= (VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
55 23 10,5 9/11,2 -20 to + 75 400425-117 400425-142 0178 35 16,7 - -20 to + 50 400425-217 - -
? Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10
? Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 94/9/EC
(see “Explosionproof solenoids” section) ? Electrical enclosures according to “NEMA”
 PTFE (carbon ? lled) PTFE (carbon ? lled) Shading coil Copper Silver
介質溫度:-20℃～+90℃，NPT螺紋,口徑:1/4-3/4,操作壓差：0.7-100公斤
 standards are available ? Compliance with “UL”, “CSA” and other local approvals available on request
? Normally Open constructions (NO) ? Other pipe connections are available on request
 ? Plug with visual indication and peak voltage suppression or with cable length of 2 m  (see Solenoids, Coils & Accessories section)
Maximum viscosity 65 cSt (mm2/s) Response time 15 - 60 ms ? uids (?) temperature range
 - 14/19,7 -20 to + 25 - 400425-342 (1) Refer to the dimensional drawings on the following page.
? Valves can also be supplied with FPM (? uoroelastomer), EPDM (ethylene-propylene), CR (chloroprene)
介質溫度:-20℃～+90℃，NPT螺紋,口徑:1/8-1/4,操作壓差：0-55公斤
FEATURES ? Heavy duty two way shut-off solenoid valves for control of air , inert gas, water,
oil and other gases/liquids compatible with the seal materials used
MATERIALS IN CONTACT WITH FLUID (?)  Ensure that the compatibility of the ? uids in contact
with the materials is veri? ed Brass body Stainless steel body Body Brass AISI 304 SS Core tube
 Stainless steel Stainless steel Core and plugnut Stainless steel Stainless steel Springs
Stainless steel Stainless steel Seat Brass Stainless steel Core disc UR UR Seals NBR NBR
and PTFE seals and discs. Use the appropriate optional suf? x letter for identi? cation
INSTALLATION ? The solenoid valves can be mounted in any position without affecting operation
 ? Pipe connection identi? er is B = NPT (ANSI 1.20.3) ? Installation/maintenance instructions are included with each valve
? Valves require a minimum operating pressure ? The solenoid valves satisfy all relevant EC directives
GENERAL Differential pressure See ?SPECIFICATIONS?  [1 bar =100  kPa]
先導式,常閉,浮動活塞,*壓,黃銅/不銹鋼閥體,
(TS) seal materials (?) air, inert gas, water, oil - 20°C to + 90°C PA (polyamide) PTFE
 Piston Stainless steel Stainless steel Piston disc PTFE PTFE Piston rings
直動式,常閉,管線裝配,*壓流體,黃銅/不銹鋼閥體,
 (cable ? 6-10 mm) Connector speci? cation ISO 4400 / EN 175301-803, form A Electrical safety
ELECTRICAL CHARACTERISTICS Coil insulation class F Connector Spade plug

阿斯卡美國**品牌*壓閥系列電磁閥